Amprobe LT-10 Lamp Tester

Description

Amprobe LT-10 Lamp Tester

2 Year Amprobe Warranty

---

Product Details:

The Amprobe LT-10 Lamp Tester is a truly groundbreaking tool that takes the guess work out of troubleshooting fluorescent light fixtures.

Instead of trying to sort out the problem, the LT-10 goes from your pocket to answers in seconds. Instead of problem finding, you can jump right into problem solving – saving you both time and money.

The LT-10 Lamp Tester is a 3-in-1 solution to test the light bulb, pins and voltage. With an industry leading 48 removable and retractable antenna, VolTectT non-contact voltage detection and its ultra-compact design, the Amprobe LT-10 Lamp Tester is the right tool for electrical and facilities maintenance applications.

A highly responsive 122 cm antenna makes it easy to test bulbs while still in the fixture, saving you trips up and down the ladder. Because the LT-10 features the Amprobe critically acclaimed VolTectT non-contact voltage detection, you’re provided with both visual and audio alerts that guide you to the source of the problem.

Test Fluorescent Lamps in 3 Easy Steps:

• Test bulb using LAMP TEST and PIN TEST
• Check voltage presence using VolTectT non-contact voltage detection
• If light is not working after verifying bulb and voltage (steps 1 and 2) replace the ballast.

Features:

• Tests fluorescent (electroluminescent) lights
• Built-in VolTectT non-contact voltage detection
• Lamp and filament test to check  fluorescent  light bulbs
• Simple one-handed, single button operation
• Ultra compact design to fit in your pocket
• 122 cm removable, retractable, highly responsive antenna included to test lights and voltage without a ladder
• Compatible with all fluorescent (electroluminescent) light bulbs:
  •     T2, T4, T5, T8, T9, T10, T12
  •     Fluorescent energy saving light bulbs
• Insulated antenna sleeve and tip provided to safely extend and retract during use
• Includes sodium lamp antenna for testing additional light bulbs:
  •     Low pressure sodium vapor bulbs
  •     High pressure sodium vapor bulbs
  •     Neon bulbs
  •     Mercury vapor bulbs
  •     Halogen metal vapor bulbs

Specifications:

Compatible lamps	T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage	Approximately 3 kV / 280 kHz
Field strength	Approximately 100 μV/m at 260 – 300 kHz
Maximum antenna length	48″
Filament test	T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection	AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V

 

Compatible lamps	T2, T4, T5, T8, T9, T10, T12 and fluorescent energy saving light bulbs
Test voltage	Approximately 3 kV / 280 kHz
Field strength	Approximately 100 μV/m at 260 – 300 kHz
Maximum antenna length	48″
Filament test	T2, T4, T5, T8, T9, T10, T12
VolTect™ non-contact voltage detection	AC 90 V to AC 600 V, 50/60 Hz CAT II 300 V, CAT I 600 V
Non-contact voltage sensitivity with probe tip (typical)	LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac
Drop proof	36″
Operating time	One second ON, one second OFF for maximum five cycles and wait for 1 minute before taking another measurement
Operating temperature	-10°C to +50°C (14°F to 122°F) ≤ 85% RH
Storage temperature	-10°C to +50°C (14°F to 122°F) ≤ 85% RH
Operating altitude	Up to 2000 meters
Battery	One 9V lithium or alkaline battery only, 6LR61/6LF22/MN1604 or equivalent.
Battery life	Up to 500 tests (Alkaline typically)
Dimensions (L x W x H)	Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna
Weight	Approximately 80 g (0.18 lb) with battery installed, excluding 48″ antenna
Safety compliance	IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-04
EMC compliance	IEC 61326-1
Certification	CSA and CE
Calibration	NA
Warranty	1 Year

 

What’s Included?

• 48″ Antenna
• Adaptor Plate
• Users Manual
• Battery
• Carrying case