FLUKE 113 True-RMS Multimeter Tester w/ Crocodile Clips KIT82
⚡ 3 Year Fluke Warranty
⚡ Fluke 113 True-rms Digital Multimeter designed for basic electrical tests
⚡ The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing.
⚡ Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600.
£105.99 exc VAT / £127.19 inc VAT
Fluke 113 True-rms Digital Multimeter designed for basic electrical tests
The Fluke 113 Digital Multimeter gives users the means to quickly and easily do basic meter set and reconnect testing. This meter is simple-to-use and has the features needed to repair most electrical problems. The Fluke 113 has significant improvements over other digital multimeters available on the market, including Fluke model 7-600. Using the Fluke VCHEK™ LoZ low impedance measurement function, users can simultaneously test for voltage or continuity. The Min/Max function lets you record signal fluctuations. The Fluke 113 can perform diode tests, and also provides both auto and manual ranging capabilities. With features such as conformance to the latest safety standards, backlight, and a much larger display that’s easier to view, this meter is a must have for every toolbox.
VCHEK™ LoZ low impedance measurement function to simultaneously test for voltage or continuity
True-rms for accurate ac measurements on non-linear loads
A large backlit display allows for easy visibility in low-lit areas
Record signal fluctuations using the Min/Max function
Diode test for testing general-purpose germanium, silicon, and power diodes
Integral holster with probe holders for easy storage
Auto and Manual ranging for added user functionality
Meets Measurement Category CAT III 600 V and Category IV 300 V standards for a higher level of safety
The optional TPAK magnetic hanger allows the user hands-free flexibility
Fluke SureGrip AC285 Alligator Clips Red and Black Set
The Fluke AC285 SureGrip Alligator clips come in a red and black set designed for use on multiple applications. Made of strong nickel-plated steel, with a jaw span of 1.1 inch. Grips anything from fine gauge wire to a 0.75 inch nut.
Recommended for use with Fluke’s TL222 and TL224 test leads, but are compatible with other manufacturer’s test leads.
CAT IV 600V and CAT III 1000V safety rated.
|VCHEK1 2 3||Range||6.000 V / 60.00 V / 600.0 V|
|Resolution||0.001 V / 0.01 V/ 0.1 V|
|Accuracy||DC, 45 to 500 Hz: 2.0% + 3
500 Hz to 1 kHz: 4.0% + 3
|Diode test4||Range||2.000 V|
|Accuracy||2.0% + 3|
|Continuity4||Accuracy||Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of 500 μs or longer|
|Ω4||Range||600.0 Ω / 6.000 kΩ / 60.00 kΩ|
|Resolution||0.1 Ω / 0.001 kΩ / 0.01 kΩ|
|Accuracy||0.9% + 2 / 0.9% + 1 / 0.9% + 1|
|Capacitance4||Range||1000 nF / 10.00 μF / 100.0 μF / 9999 μF|
|Resolution||1 nF / 0.01 μF / 0.1 μF / 1 μF|
|Accuracy||1.9% + 2
100 μF – 1000 μF: 1.9% + 2
1000 μF: 5% + 20
|1. All VChek voltage ranges are specified from 60 counts to 100% of range. Because inputs below 60 counts are not specified, it is possible and normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together.
2. Crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale.
3. Minimum measureable input in VCHEK autorange is 3 VDC. For measurements below 3 VDC, push Range button twice to get to 6 VDC manual range.
4. After measuring voltage, a wait time of 1 minute is required to maintain accuracy of ohms, capacitance, diode test, and continuity.
|Maximum voltage between any terminal and earth ground||600 V|
|Display||3 3/4-digits, 6000 counts, updates 4/sec|
|Operating temperature||-10°C to 50°C (14°F to 122°F)|
|Storage temperature||-40°C to 60°C (-22°F to 140°F)|
|Temperature coefficient||0.1 x (specified accuracy) / °C (< 18°C or > 28°C)|
|Operating altitude||2,000 m|
|Storage altitude||10,000 m|
|Relative humidity||95% to 30°C
75% to 40°C
45% to 50°C
|Battery type||9 Volt Alkaline, IEC 6F22|
|Battery life||Alkaline: 300 hours typical, without backlight|
|Size (H x W x L)||167.1 x 85.1 x 46.0 mm (6.58 x 3.35 x 1.81 in)|
|Weight||13.0 oz (404 g)|
|Safety||IEC 61010-1: Pollution Degree 2
IEC 61010-2-033: CAT IV 600V
|EMI regulations||Complies with FCC Part 15, Class B|
|VCHEK||Input impedance (nominal)||~3 kΩ < 300 pF|
|VCHEK||Common mode rejection ratio
(1 kΩ unbalanced)
|> 60 dB at DC, 50 or 60 Hz|
|Ω||Open circuit test voltage||< 2.7 VDC|
|Full scale voltage||< 0.7 VDC|
|Diode test||Open circuit test voltage||2.7 VDC|
|Full scale voltage||2.000 VDC|
|Ω||Short circuit current||< 350 μA|
|Diode test||Short circuit current||< 1.0 mA|
- 4mm Silicone Test leads
- User’s manual
- 9 V battery (installed)
- Fluke AC285 SureGrip Crocodile Clips
- LDMC25 Case (Internal Measurements – LxWxD – 20x13x5cm)
You may also like…
Fluke 117 Multimeter with Non-Contact Voltage Detection Fluke Test Lead Set and Protective Case LDMC27B£189.99 exc VAT / £227.99 inc VAT Select Options
Fluke TLK-225 SureGrip Master Test Leads, Probes & Croc/Aligator Clips Electricians Test Kit£129.99 exc VAT / £155.99 inc VAT Read more
Fluke 324 True-rms Clamp Meter£119.99 exc VAT / £143.99 inc VAT Select Options
Fluke T150 Voltage & Continuity Tester£79.95 exc VAT / £95.94 inc VAT Select Options
Fluke 325 Digital True-RMS Clamp Meter£180.00 inc VAT exc VAT / Select Options