Description

Fluke 1664 FC Ultimate Electrical Testing Kit – Exclusive to Testermans

 

 

The Fluke 1664 FC Ultimate Electrical Testing Kit – Exclusive to Testermans – is a comprehensive bundle of electrical testing equipment that is ideal for professional residential or commercial/industrial electricians, maintenance technicians and electrical engineers who need an extensive set of tools for testing electrical installations, circuits, and equipment.

Offering exceptional value for money the Fluke Ultimate Electrical Testing Kit (Exclusive to Testermans) is EV compatible and provides everything you need to perform a wide range of tests quickly, accurately, and safely.

The Fluke 1664 FC Ultimate Kit includes:

Fluke 1664FC Multifunction Installation Tester

Designed to test to all local regulations and includes an “Insulation Pre-test”, runs seven installation tests automatically in one sequence with a single connection and allows you to share test results in real time over your smartphone.

Fluke 117 Electrician’s Multimeter

Integrated VoltAlert™ technology for fast, go/no go non-contact voltage detection. Features AutoVolt automatic ac/dc voltage selection. Provides low input impedance to help prevent false readings due to ghost voltage. Provides Min/Max/Average to record signal fluctuations. CAT III 600 V safety rated.

Fluke 325 True RMS Clamp Meter

In addition to true-rms AC current and voltage on non-linear loads, the 325 measures; DC current, DC voltage, Temperature, Frequency. Covers most problems you see day-in, day-out. This clamp meter offers True-rms AC voltage and current measurements on non-linear signals. Paired with the CAT III 600 V, CAT IV 300 V safety rating the clamp meter can also measure; AC/DC current up to 400 A through jaw, AC/DC voltage to 600 V using test leads, Measures frequency from 5 Hz to 500 Hz; resistance to 40 kΩ, Measures temperature from -10 °C to 400 °C with included K-type thermocouple, Min/Max function records important values.

Fluke T6-1000 PRO Electrical Tester

Measures voltage up to 1000 V ac and current up to 200 A ac, all through the open fork and without test lead contact to live voltage. Connect the black lead to ground with the included heavy-duty alligator clip, slide the wire into the open fork and see both voltage and current at the same time. On wires up to AWG 4/0 (120 mm2), carrying as much as 200 A and 1000 V ac.  True-rms with accurate voltage and current measurements, even when measuring complex signals and FieldSense™ technology for ac voltage, current and frequency measurement without making electrical contact to live voltage. Other capabilities: 1 to 1000 V ac or dc. 0.1 to 200 A ac. Resistance 1 Ω to 100 kΩ. Frequency measurement 45 Hz to 66 Hz through open fork. Works with most wire up to AWG 4/0 (17.8 mm/0.7” jaw opening). HOLD button temporarily freezes the screen for easy viewing. Easy to read display with backlight.

The Fluke ST240+ RCD Socket Tester with Beeper

Checks that each wire in the outlet is properly connected to the building’s electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Able to identify several common wiring errors, including reversed live and neutral wires and an earth fault, the ST240+ will give you confidence on your next job.

The Fluke Pack30 backpack

Made for professional electricians and tradesmen is rugged yet weighs less than 6.5 pounds. It is built with durable high-quality polyester and features over 30 heavy-duty pockets for storing and carrying your tools to the next job. Three main storage compartments for test tools, hand tools, and a 12” laptop/tablet; a fourth smaller molded pocket for protection of smaller items. Rugged waterproof molded bottom offers protection from the elements and keeps the backpack standing for convenient access to tools. See why the Fluke Backpack is the number one choice for carrying tools.

TLK-225 -1, SureGrip™ Master Accessory Set

Includes AC220 SureGrip™ Alligator Clip Set, AC280 SureGrip™ Hook Clip Set, AC283 SureGrip™ Pincer Clip Set, AC285 SureGrip™ Large Jaw Alligator Clip Set, TP238 SureGrip™ Insulated Test Probe Set and TL224 SureGrip™ Silicone Test Lead Set.

Fluke T150 Two-pole Voltage and Continuity Electrical Tester

Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability with switchable load. Avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs). Resistance testing to 1999 ohms, Audio on/off for testing in quiet areas, Phase rotation indicator for 3-phase systems and Single-pole phase test offers fast identification of live conductors.

Fluke TPAK ToolPak™ Magnetic Meter Hanger

Allows you to hang your meter on nails, hooks, and pipes so you can take hands-free measurements. Always demand the best; use the original TPAK Meter hanging kit with its unique rare-earth magnet for superior gripping strength to ensure your tools don’t slide or fall. Hang your meter in a variety of ways for convenient hands-free operation, solve any hanging and positioning problems you may face. Use the hook and loop strap to wrap around a pole or pipe and hang your meter. Use the magnet to throw your meter on a panel door while you work the test leads to take a measurement quickly and safely.

Lightmate Circuit Light Check Adapter Kit

This Light-Check adapter is made to ensure your safety during testing light points. The adapters can be used in conjunction with a wide variety of test equipment that uses test leads terminating in 4 mm safety connectors. The adapter enables a range of tests to be conducted on light fitting terminals eliminating the need to hold test probes in place and ensure good reliable and safe contact.

PRV240 Proving Unit

Portable, pocket-sized, battery-powered voltage source. It is unique in that it sources stable ac and dc voltages for both LoZ and HiZ instruments. Key functions include single LED indicates functionality, making this unit a simple-to-use solution for complying with TBT verification of your test tool. Voltage is sourced through recessed contacts that are activated when test probes are inserted, preventing accidental contact.

50m R2 Test Lead

The SMJ 50m R2 test lead with crocodile clip is an essential tool for electrical testing and is suitable for use with a multimeter. It features a high-quality, insulated cable that is flexible and durable, making it ideal for use in a variety of applications. The 50m length of the test lead provides plenty of room for manoeuvring, allowing you to reach difficult-to-access areas. The crocodile clip at the end of the lead provides a secure and reliable connection to the point being tested, ensuring accurate readings. Can be used with all makes of multifunction and installation testers.

Fluke C1600 Meter Carry Case

The Fluke C1600 Case is a durable and versatile carrying case designed to keep your valuable tools and equipment safe and secure during transport. This rugged case is made from high-quality materials and features a hard shell exterior that can withstand the toughest conditions.