KEWTECH KT71 PAT Tester ProTech Kit PPK202

2 Years Kewtech Warranty


Product Details:

Amongst the most popular Pat testers on the market

The fast automatic test sequences mean that you only turn the knob to the type of test that you want then press start

The IET Code of practice says that if you cannot undertake an insulation test at 500V then you can either conduct a run leakage / touch leakage or 250V insulation – the KT71 enable you to do these alternative tests in the most simplistic of ways.

The KT71 has a lid and test lead pouch to keep everything safe and protected when not in use


  • Performs Earth bond at 200mA for IT appliances and high current 20A for all other appliances
  • 250V / 500V insulation test voltages
  • Run / leakage at 230V
  • Single rotary dial position initiates test sequence
  • Class-I IT 200mA Earth Bond
  • Class-I 20A Earth Bond
  • Class-II
  • Memory for test lead resistance compensation
  • Extension lead test – including polarity
  • LED indication of pass / fail as well as a result display
  • Automatic check if appliance is switched on or not
  • Tests 110V appliances for earth bond and insulation (with appropriate test adaptor)
  • Tests in accordance with the IET Code of Practice


  • Mains Leads ACC7209
  • KAMP-S  Short IEC lead for extension lead testing
  • Earth Lead ACC7208
  • ACC7163 Blade prod
  • Instruction Manual
  • Calibration Certificate

​PAT Tester ProTech Kit

The PAT Tester ProTech Kit is the perfect kit for anyone in the PAT testing industry, offering a wide range of accessories, socket and plug test adaptors, ideal for technicians to accompany their own testers.

This kit includes nearly everything needed to perform your basic checks alongside your individually purchased tester; all encased within a strong, reliable, multi compartment carry case.


  • ABS Case
  • WIHA 25477 6 pc screwdriver set
  • x10 each 3,5,13 amp fuses
  • x10 13 amp mains plugs
  • 1000 pass labels
  • 200 fail labels
  • x3 Clover Lead & Figure 8 Test Lead Adaptors
  • HandyMAN TEK362 Heavy Duty Auto Ranging Digital Multimeter
  • MLD100 Microwave Leakage Tester Detector (LCD) with case
  • LED socket tester
  • LDM1AC Non contact voltage detector inc x2 AAA batteries
  • Wire cutter
  • Automatic wire stripper
  • Schuko (European) test adaptor
  • 110V 16amp plug test adaptor
  • 110V 16amp socket test adaptor
  • 230V 16amp plug test adaptor
  • 230V 16amp socket test adaptor
  • 14 piece T-Bar Screwdriver Set

Non-Contact Volt Detector Voltstick

  • Detects voltages from 90 – 1000V
  • Runs on 2 X AAA batteries
  • IP54 rated
  • CAT II 1000v
  • Audible buzzer and pin light

Additional information

Weight 8250 g


Meta Keywords

Kewtech KT71 with the PAT Tester ProTech Kit. All of what you need to carry out an efficient PAT Test.

Contact Us banner service team