Martindale VIPDLOK Voltage Indicator, Proving Device & Lock Out Kit

£0.00 exc VAT / £0.00 inc VAT

Out of stock

Description

Martindale VIPDLOK Voltage Indicator, Proving Device & Lock Out Kit

Martindale VIPDLOK Voltage Indicator, Proving Device & Lock Out Kit

Complete safe isolation solution, safety voltage indicator and proving device with lock out kit.

The complete solution for safe isolation, the Martindale VIPD Lock Out Kit contains the VI13700/2 voltage indicator, PD440 proving device, along with a complete lock out kit, supplied with soft carry cases.

Nothing is more dangerous than trusting a defective voltage indicator to test for a dead circuit. Safe electrical work requires the use of a voltage indicator that has been proved with a proving unit before and after use.

The Martindale VIPD contains the VI13700/2 voltage indicator and the PD440 proving device, enabling you to comply with health and safety recommendations for safe working.

The 16 piece kit contains the following items:

  • 1 x PD440 proving device
  • 1 x VI13700 voltage indicator
  • 1 x Padlock with unique key
  • 1 x Steel safety hasp, with space for up to 6 padlocks
  • 1 x Green mini MCB lock
  • 1 x Yellow mini MCB lock
  • 1 x Blue medium MCB lock
  • 1 x Large red MCB lock
  • 1 x Red fuse lockout breaker
  • 5 x Danger tags which can be overwritten
  • 1 x Black marker for writing on Danger tags
  • 1 x TC55 soft carry case
  • 1 x TC69 Voltage Indicator and Proving Unit Carry Case

Martindale VI13700 Voltage Indicator

Product Details

Before doing any electrical work it is essential to be absolutely certain the circuit is dead. This GS38 compliant voltage indicator rapidly and safely checks for AC and DC voltages in four stages from 50V to 400V. The bright, long life LED indicators give clear and immediate display of the voltage level range.

The tough, moulded case construction combined with heavy duty, double insulated leads which terminate in a lockable and retractable probe sheath and a substantial finger guard, make this a very reliable and safe instrument.

The return lead incorporates an HRC fuse which, together with the retractable test prods, ensures that the unit fully meets all the GS38, and BS EN61010 recommendations.

Widely specified by training organisations, utilities and large contractors.

Specification

Voltage Range:
50 – 600V AC / DC.

LED Indication:
+/- 50, 100, 200, 400V.

Polarity & Voltage Indication:
from 12V.

AC / DC Voltage Detection:
automatic.

Range Detection:
automatic.

Response Time:
<0.1s.

Frequency Range:
DC, 0-65Hz.

Test Current:
3.5mA max at 600V AC / DC.

Duty Ratio:
30s ON / 240s OFF.

Temperature Range:
-10°C to +55°C.

Humidity:
max 85% RH.

Altitude:
up to 2000m.

Overvoltage Category:
CAT IV 600V, CAT III 1000V.

Pollution Degree:
2.

Environmental Protection:
IP54.

Safety:
GS38, BS EN61010.

Weight:
130g.

Dimensions:
205 x 67 x 27mm.


Martindale PD440 – 440V Proving Device

The PD440 can also be used to check Drummond and other filament test lamps as well as standard multimeters and other manufacturers two pole voltage indicators.

Using a voltage indicator without first proving it is working correctly could prove fatal.


Optional extra!

Please choose this from the drop-down list above to add to your shopping cart!

NICEIC Safe Isolation Procedure DVD –  How to work safely with electricity

UPDATED TO: IEE WIRING REGULATIONS 17th Edition

BS7671:2008

STOCKCODE:  9-781906-091125

Injuries and fatalities to electricians caused by touching live electrical conductors have been a frequent occurrence since electricity was first utilised. However these incidents can be easily avoided with just simple common sense procedures! In this HSE endorsed DVD NICEIC’s Tony Cable and Learning Lounge presenter Dave Austin examine this important topic and give practical advice throughout.

The DVD starts by examining a typical incident that can happen to an electrician who doesn’t isolate the supply correctly before starting his work! Tony and Dave then visit a Crown Court to discuss the legislation requiring safe working practices. They then talk through the fundamentals of safe isolation procedure which must be adopted whenever you work with electricity explore different means of locking off for both domestic and industrial situations and also explore safe systems of work and permits to work encountered in commercial and industrial situations.

This DVD is ideal for all contractors whether Domestic Installer or Approved Contractor and also for organisations that may employ them or sub-contract them. The DVD runs for approximately 15 minutes.

Additional information

Weight 0.00 g
Model

Martindale VIPDLOK

Meta Keywords

Martindale VIPDLOK Voltage Indicator, Proving Device & Lock Out Kit

Contact Us banner service team