Socket & See MFT5000 Multifunction Installation Tester – 18th Edition Compliant with THREE YEAR WARRANTY – New for 2020
- LOWEST PRICE GUARANTEE
- High accuracy no trip loop testing
- Ramp and auto RCD testing
- Low Ohm continuity test
- Ideal for domestic, commercial and industrial
£495.00 exc VAT / £594.00 inc VAT
Socket & See MFT5000 Multifunction Installation Tester
18th Edition Compliant
THREE YEAR WARRANTY
Socket & See MFT5000 multifunction tester
The Socket & See MFT5000 18th Edition Multifunction Tester packs all essential test functions into one, affordable, easy to use unit. The MFT5000 is robust and designed for everyday testing. Featuring a colour coded, high contrast facia and full colour back lit screen, the unit can be used in a whole range of environments from domestic to industrial.
Socket & See MFT5000 test sequences
Selectable ranges 250V / 500V and 1000V. The current and voltage are measured and the external resistance calculated and displayed.
High current 2 wire test mode enables the user to test the true impedance of both the Line-Neutral Loop and the Line-Earth loop and therefore to establish both the PSC (prospective short circuit current) and the PFC (prospective fault current) for the installation
No trip 3 wire test mode generates a current that is too low to trip an RCD on an otherwise healthy circuit. The No Trip test is a 3-wire test that also checks the Live, Neutral/Earth conductors are correctly connected before running the loop test.
PFC / PSC
Result displayed by pressing the PFC / PSC button after a loop test (High Current and No Trip)
Individually selectable 30mA / 100mA / 300mA and 500mA (Type AC/A) and 100mA / 300mA (Type ACS / AS).
30mA Auto test – The unit will conduct all six required tests at a single touch of a button. Then when the RCD under test “trips” reset the RCD and continue to do so until the test procedure is complete. Clear PASS / FAIL indication provided on screen.
Ramp Test – Gradually increases the fault current and identifies the level of additional leakage at which the RCD trips. Useful for diagnostic testing of circuits where nuisance tripping is a problem and helps to identify the difference between an over sensitive RCD and excessive leakage from poor insulation, or equipment with high leakage.
During phase rotation measurement the amplitudes and phase angles of the three inputs L1 L2 L3 are checked against limits, allowing for mild unbalance conditions. The indication 1-2-3 is displayed for normal rotation (L2 lags L1) and 3-2-1 for reverse rotation (L2 leads L1).
Display of Phase rotation is Automatic when all three tests leads are connected to the 3 phase supply.
The MFT5000 will display .1 .2 .3 or .3 .2 .1 depending on the direction of phase rotation.
Perform a quick and easy check of a sockets wiring condition.
Polarity Test Pad
Test for and identify rare reverse polarity (Live ‘Phase’ to earth/neutral and earth/neutral to Live ‘Phase’. A potentially dangerous condition that conventional loop testers may not highlight.
Establish the resistance of the circuit under test. Lead null function for fast and accurate measurement.
- Socket & See MFT5000 multifunction tester
- 3 wire test lead set including croc clips and probes
- Pro lead: 3 x 4mm to 13A plug
- Remote switched probe
- Shoulder/Neck strap
- Hard carry case
- Printed instruction manual
- Calibration certificate
- Three Year Warranty
TO SEE PRODUCT SPECIFICATIONS DATA SHEET CLICK HERE: socket_see_mft5000_datasheet
You may also like…
Socket and See Industrial 3 Phase Socket Tester 16amp 400v 415v 4pin SOK60/16HD with Phase Rotation£69.95 exc VAT / £83.94 inc VAT Add to basket
Socket & See SS130 R2 Socket Test Adaptor£18.95 exc VAT / £22.74 inc VAT Add to basket
Socket and See FFCDCFKIT Fuse Finder and Dead Circuit Tester Finder Tracer Kit£179.95 exc VAT / £215.94 inc VAT Add to basket
Socket & See SOK36 Professional Socket Tester£44.95 exc VAT / £53.94 inc VAT Select Options
Socket and See DCF200 Multifunction Dead Circuit Tester Tracer Finder£99.95 exc VAT / £119.94 inc VAT Add to basket
Socket & See SOK40/16HD 230V Industrial Socket Tester 16amp£39.95 exc VAT / £47.94 inc VAT Add to basket