Description

Fluke 87V/E2 Industrial Electrician E2 Combo Kit:

The Fluke 87V/E2 Industrial Digital Multimeter E2 Combo Kit is ideal for electricians and can be used to troubleshoot motor drives, plant automation, power distribution and electromechanical equipment. This kit includes the following Fluke products:

Fluke 87V Industrial Digital Multimeter Description:

This rugged digital multimeter can measure the following electrical parameters:

• AC/DC voltage: up to 1000V
• AC/DC current: up to 10A (0.1µA resolution)
• Resistance: up to 50MΩ
• Capacitance: up to 9999µF
• Frequency: up to 200kHz
• Temperature: up to 1090°C (using the supplied Fluke 80BK-A Temperature Probe)
• Duty cycle
• Conductance
• Diode

The Fluke 87V Industrial Digital Multimeter offers true-RMS AC voltage and current readings, enabling the measurement of non-linear signals, and can measure DC voltage and current to an accuracy of 0.05%. It is auto and manual ranging and will indicate measurements on its large-digit display with an analogue bar graph and two-level backlight. As standard the Fluke 87V Industrial Digital Multimeter has a 3 3/4 -digit resolution (6000 counts), however, this can be increased to 4 ½-digits (20 000 counts) when necessary.

In addition to the aforementioned measurement capabilities, the Fluke 87V Industrial Digital Multimeter includes the following data functions:

• Peak Capture
• Min/Max/Avg Recording (enables the capture of intermittent as short as 250µS)
• Relative mode: calculates and displays the difference between two readings
• Hold

Please see the video below for more information regarding the Fluke 87V Industrial Digital Multimeter’s functions.

This durable and ergonomic DMM is CAT IV 600V, CAT III 1000V safety rated. It includes an easy-access door to facilitate fast battery changes without breaking the calibration seal and can be used with Fluke’s ToolPak™ Magnetic Meter Hanging Kit to enable hands-free operation.

The Fluke 87V Industrial Digital Multimeter is a rugged, accurate and comprehensive digital multimeter suitable for a range of industrial applications.

Applications

Fluke 87V Industrial Digital Multimeter Key Features:

• Rugged digital multimeter suitable for industrial applications
• AC/DC voltage: up to 1000V
• AC/DC current: up to 10A (0.1µA resolution)
• Resistance: up to 50MΩ
• Capacitance: up to 9999µF
• Frequency: up to 200kHz
• Temperature: up to 1090°C (using the supplied Fluke 80BK-A Temperature Probe)
• Duty cycle
• Conductance
• Diode
• True-RMS AC current and voltage
• Measure DC voltage and current to an accuracy of 0.05%
• Auto- and manual-ranging
• Large-digit display with an analogue bar graph and two-level backlight
• 3 ¾ – digit resolution (6000 count) can be increased to 4 ½ -digit resolution (20 000 counts)
• Peak Capture function
• Min/Max/Avg Recording
• Relative mode
• Hold function
• Safety rated: CAI IV 600V, CAT III 1000V
• Easy-access door enables fast battery changes without breaking the calibration seal
• Use with Fluke’s ToolPak™ Magnetic Meter Hanging Kit to enable hands-free operation
• A rugged, accurate and comprehensive digital multimeter suitable for a range of industrial applications

Fluke TL224 SureGrip™ Insulated Test Leads Key Features:

• Red and black digital multimeter test leads
• Reinforced strain relief
• Safety shrouded
• Standard diameter banana plugs for a variety of test lead configurations
• One end features a right angle connector and the other features a straight connector
• Safety rated: CAT IV 600V, CAT III 1000V
• 10A rated
• CSA listed
• Rubber over-moulded surfaces and finger-hugging curves provide a comfortable, reliable grip
• 1.5m silicone wires that resist the heat and cold

Fluke AC220 SureGrip™ Alligator Clips Key Features:

• One small, insulated, red clip with nickel-plated jaws
• One small, insulated, black clip with nickel-plated jaws
• For use with Fluke’s TL222 and TL224 Test Leads
• The blunt tips can be used to grab screw-heads up to 9.5mm
• Rubber over-moulded surface and finger-hugging curves for improved grip
• CAT IV 600V, CAT III 1000V
• 10A rated
• CSA listed
• One-year warranty from Fluke

Fluke TL238 SureGrip™ Test Probes Key Features:

• Specifically designed for high energy environments
• Only 4mm of exposed metal at the tip reducing the risk of accidental shorts that could result in arc flash explosions
• Probe extenders fit between modular test leads and test probes
• Probe extenders increase the distance between the user and the live circuit by 20.5cm/ 8”
• IEC 1010-2-031
• CAT III 1000V, CAT IV 600V
• Pollution degree 2
• 10A rated

Fluke ToolPak™ Magnetic Meter Hanging Kit Key Features:

• Hang the Fluke 87V DMM on nails, hooks and other objects
• Enables hands-free measurements
• Powerful, rare-earth magnetic hanger strap
• Durable

Fluke 80BK-A DMM Temperature Probe Key Features:

• Temperature range: -40°C to +260°C
• Accuracy: ±2.2°C or 2% (whichever is greater)
• One-piece construction
• 1m (39”) lead
• Type-K thermocouple
• Standard shrouded banana jack

Fluke C35 Soft Carrying Case Key Features:

• Opens laterally allowing the Fluke 87V DMM to be used without removing it from the case
• Durable polyester 600D case
• Optimised for long life
• One-year warranty from Fluke