Fluke Amprobe PRM-6 Phase Rotation Meter Sequence and Motor Rotation Tester




Original price was: £185.00.£81.00Current price is: £81.00. / £97.20 incl VAT
⚡ Clear display of 3-phase wire sequence indication
⚡ Synchronous or asynchronous motor rotation direction
⚡ Shows error displays such as missing phase, or one input connected to neutral or PE
⚡ Non-contact, wireless motor rotation detection on running motors
⚡ Indicates motor rotation of disconnected motors by spinning the shaft by hand or other means
In stock
Description
Amprobe PRM-6 Phase Rotation Meter Sequence and Motor Rotation Tester
If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.
The PRM-6 Motor and Phase Rotation Tester can test the motor rotation of 3-phase systems, and verify 3-phase receptacle wiring and phase sequencing with test leads.
An additional advanced feature is wireless motor rotation detection, which senses motor rotation direction without use of test leads. This is particularly useful for fast-running motors when the motor rotation cannot be visually determined or when the drive shaft is not visible.
Key Features:
- 3-phase to phase voltage up to 700V
- Clear backlit LCD screen with easy-to-read symbols
- Durable, rubber casing can survive drops from a height of up to 1m
- Low battery warning
- CAT IV 600V rated
Specifications
| General Specifications | |
| Operating temperature | 0°C to 40°C (32°F to 104°C) |
| Operating altitude | Up to 2000 m |
| Power | AAA battery (2) |
| 3 phase indication | LCD |
| Dimensions (H x W x D) | 5.43 in x 2.56 in x 1.3 in (13.7 cm x 6.5 cm x 3.3 cm) |
| Weight | .38 lb (.17 kg) including battery |
| Dust/water resistance | IP 40 |
| Pollution degree | 2 |
| Overvoltage category | CAT IV 600 V |
| Agency approvals | |
| Safety | Conforms to EN 61010-1 EN 61010-031 EN 61557-1 EN 61557-7 |
| EMC | Conforms to EN 61326-1 |
| Electrical Specifications | |
| Rotary field detection | |
| Voltage range (frequency) | 40 – 700 V (16 – 60 Hz) 50 – 700 V (60 – 400 Hz) |
| Nominal test current | < 3.5 mA |
| Non-contract rotary field indication | |
| Frequency range | 16 – 400 Hz |
| Motor connection (with leads) | |
| Voltage range | ≥ 1 – 700 V |
| Frequency range | 2 – 400 Hz |
| Nominal test current | < 3.5 mA |
- Beha-Amprobe PRM-6 Phase Rotation Tester
- 3 x Test Leads
- 3 x Test Probes
- 3 x Alligator Clips
- User Manual
- Carrying Bag
- 2 x AAA Batteries

