Metrel MI3125BT Multifunction Tester + Metrel A1532XA EVSE Adaptor Electric Vehicle Charging Point Test Kit

⚡ 2 Year Metrel Warranty Included

⚡ Includes the versatile, Bluetooth-enabled Metrel MI3125BT MFT

⚡ Metrel A1532 simulates a vehicle attached to a charging point

⚡ An economical kit which is perfect for testing electric vehicle charging points

£995.00 exc VAT / £1,194.00 inc VAT

Add Personalised Calibration Certificate

Product price
Additional options total:
Order total:


Product Details:

The Metrel EVSE Test Standard Kit is a great purchase option for contractors working on electric vehicle charging points. It includes a Metrel A1532XA EVSE Adaptor and a Metrel MI3125BT Multifunction Tester.

The Metrel MI3125BT Multifunction Tester is a useful instrument with multiple tests for electrical installations. It performs automatic R1+R2 earth loop impedance measurements and is also capable of performing insulation testing (100V, 250V, 500V, 1000V), RCD testing (ramp, no-trip), PSC, LE, LN, and earth spike testing (2- or 3-wire).

The internal memory on the Metrel MI3125BT can store results which can then be downloaded to a computer afterward for further analysis. Operation is undertaken using a set of clear operational buttons and Bluetooth connectivity allows communication and operation using the Metrel Eurolink Android App.

The Metrel A1532XA EVSE Adaptor effectively allows an MFT to simulate the effect of a vehicle plugged into a charging point. It allows testing on Mode 3 EV supply equipment with type 2 connections without any need to disassemble the charging point. The adaptor can simulate many different charging states with cooled or uncooled charging as well as testing progressive RCDs or B-type RCDs.

Metrel MI3125BT Multifunction Tester

  • Continuity Test R1 & R2 low 200mA
  • Automatic R1+R2 Testing using the EasiSwitch Adaptor
  • Insulation tests @ 100v, 250v, 500v, and 1000v
  • Insulation range up to1000MΩ
  • Complete RCD Auto Test – “All 6 tests in 1 visit”
  • RCD Ramp Test – indicates actual trip current
  • RCD Triplock – Guaranteed not to trip RCD’s
  • Loop, ZE,ZS,110V,230V and 415V
  • PSC (Measure the potential fault current between phase/neutral and earth/neutral conductors), LE and LN
  • 2 or 3 wire Earth Spike Testing
  • Multi Voltage System Support
  • Multi Voltage Monitor “online” single/3 phase Real-Time AC Measurement
  • Phase rotation
  • Polarity Test
  • Frequency Test
  • Downloadable (stores up to 1700 results)
  • In-built battery charger
  • PASS/FAIL Indications LED’s
  • Magnetic Holder for Hands Free operation
  • Bluetooth communication with PC, Android tablets and smart phones via built-in BT.
  • EuroLink Android APP, data management tool (optional accessory).

Metrel A1532 EVSE Adaptor

  • Input voltage: 400V (3-phase)
  • Frequency: 50Hz
  • Test current: 13A
  • Proximity Pilot (PP) simulation: Open circuit; 13A; 20A; 32A; 63A
  • Control Pilot (CP) simulation: State A (not connected), State B (connected, not charging);
  • State C (charging without ventilation); State D (charging with ventilation); State E (error – CP short to PE via diode)
  • Overvoltage category: 300V Cat II
  • Protection degree: IP40
  • Pollution degree: 2
  • Protection classification: Double insulation
  • Altitude: 3000m sea level
  • Dimensions (L x W x H): 200mm x 100mm x 70mm
  • Test lead length: 0.5m
  • Weight: 0.82kg
  • Working temperature range: 0˚C to 40˚C @ 95% RH, non-condensing
  • Storage temperature range: -20˚C to 70˚C
  • Maximum storage relative humidity: 90% RH (10˚C to 40˚C); 80% RH (40˚C to 60˚C)
  • Metrel MI3125BT Multifunction Tester
  • Metrel A1532 EVSE Adaptor
  • Metrel Eurolink software
  • Soft carry case
  • Mains cable
  • RS232 FW upgrade cable
  • Test cable w/ universal connection
  • USB cable
  • 3 x 1.5m test leads
  • 12V battery charger
  • 3 x test probes
  • 3 x crocodile clips
  • Hand strap
  • CD instruction manual
  • Manufacturers Calibration Certificate
  • 3-Year Metrel Warranty


There are no reviews yet.

Be the first to review “Metrel MI3125BT Multifunction Tester + Metrel A1532XA EVSE Adaptor Electric Vehicle Charging Point Test Kit”

Contact Us banner service team