TPT420 LCD/LED Two Pole Voltage & Continuity Tester VF5 AC Voltage Detector (Audible) MSA1363 UK Mains Test Socket Adaptor MST220 UK Mains Socket Tester (Audible) LA-KIT Set of five Lamp/Luminaire Light Fitting Test Adaptors MSL10 Wall Stud Locator
For use with all single and 3-phase electric vehicle charging points Performs PE Pre-Test, CP Error/PE Error simulations and more Includes Type 2 & Type 1 Charging plugs, carry case and connection cables Supplied with Type 2 Plug and Type 1 to type 2 Plug Adaptor ⚡ Lightweight & compact design
⚡ Checks mode 2 and single-phase mode 3 (level 1 and two phase level 2) chargers ⚡ Checks chargers with SAE J1772 Type 1 and Type 2 connectors ⚡ Performs four EV charger safety checks ⚡ Performs four EV charger operation checks ⚡ Checks to see if nuisance tripping or RCD/GFCI is likely to occur ⚡ Reads control pilot state…
⚡ Seamless Integration: Fully automated EV charger testing when paired with the Megger MFT-X1. ⚡ Enhanced Efficiency: Eliminates the need for manual adaptors or control boxes, speeding up testing. ⚡ Comprehensive Testing: Supports single and three-phase chargers with full CP and PP state control. ⚡ Robust and Reliable: IP54-rated for outdoor use, with lithium-ion battery and USB-C charging. ⚡ Advanced…
Approximately 30cm x 27cm x 9cm Internal slot for test leads, crocodile clips, and test probes Ergonomic handle for easy transport Stable base allows the case to stand upright Secure clips prevent accidental openings
This Megger hard carry case is suitable for all MFT 1700 Series multifunction testers. This carry case doesn't just store and protect your tester There is also enough space for the accessories such as leads. Approx Measurements: 37 x 34 x 11cm
⚡ The user can test with more than 13 testing features, all included in this versatile and well-protected multi tester ⚡ The IMT100 is able to store up to 256 test results, which can then be uploaded to a USB an exported externally ⚡ Users can run a 4 wire low resistance bonding test or a 2 wire continuity and…
⚡ 4 mm safety socket - compatible with any test equipment that has 4 mm safety connectors ⚡ Voltage range - 0 V to 253 V AC ⚡ Frequency range - 50/60 Hz ⚡ Maximum current - 2 A ⚡ IEC 61010 compliant - meets the safety standards for electrical test equipment
🔌 Compatible with Megger MFT-X1 Li-ion battery pack 🔌 Includes UK, EU, USA, and AU plug adapters 🔌 Fast and safe charging with built-in protection The MBC2100 charger is designed specifically for the Megger MFT-X1’s lithium-ion battery pack.
⚡ Replacement Battery or Secondary Battery For Megger MFT-X1 ⚡ Clips In And Out Easily ⚡ 4.4Ah capacity, providing extended power to your Megger MFT-X1 ⚡ Durability and resilience ⚡ Long-lasting and consistent power supply
⚡ Trace cables and conductors in walls Effortlessly locate wires within walls for seamless troubleshooting and maintenance. ⚡ Works on both live and dead cables or conductors Adaptable for various situations, ensuring reliable operation regardless of the cable's state. ⚡ Locate conductor breaks and short circuits Quickly identify faults to save time and minimize disruption during repairs. ⚡ Identify fuses…
⚡ Identifies circuit breakers or fuses for quick and accurate identification. ⚡ Simple to use with automatic sensitivity adjustment for effortless operation. ⚡ Provides both audible and visual alarms to confirm fuse or breaker location. ⚡ Compatible with 110V and 230V systems for versatile use across various applications. ⚡ Includes industry-standard 4mm connectors and red/black crocodile clips for easy connections.
Compatible with the Megger MFT-X1 Multifunction Tester for extended field use. Holds 8x AA alkaline batteries for a quick and reliable power source when charging is not possible. Ideal for remote work or sites where access to charging facilities is limited. Easy to replace and install, ensuring minimal downtime for your tester. Provides a cost-effective alternative to rechargeable batteries, using…
⚡ Next generation 2-wire and 3-wire non-trip loop testing ⚡ User upgradeable operating system ⚡ High resolution 0.001Ω loop test ⚡ Automatic volt-drop measurement ⚡ Stabilised insulation test voltage ⚡ Configurable RCD and EV auto-sequence tests ⚡ Full colour TFT bonded display ⚡ Re-designed lead set and carry case solution ⚡ Three Year Megger Warranty
Complete professional electrical testing kit for installation, maintenance & certification MFT-X1 multifunction tester with True Loop™ technology & patented Confidence Meter™ High-resolution 0.001Ω loop testing & stabilised insulation accuracy (±2%) Configurable RCD & EV charge point testing capabilities CAT IV rated for maximum on-site safety TPT420 two-pole voltage tester with LCD/LED display & continuity function Audible voltage warning — even…
⚡ Next generation 2-wire and 3-wire non-trip loop testing ⚡ User upgradeable operating system ⚡ High resolution 0.001Ω loop test ⚡ Stabilised insulation test voltage ⚡ THREE YEAR MEGGER WARRANTY
Strong And Durable Enables Multi-tasking on site A useful neck strap for Megger MFTs Compatible with MFT-X1/MFT 1700/MFT 1800 Series Facilitates practical, hands-free use of tester
The Megger MFT‑X1 Battery Module (1013‑452) comes complete with 8x high‑capacity NiMH AA rechargeable batteries (2000mAh, 1.2V). Designed for the Megger MFT‑X1 Multifunction Tester, this bundle ensures reliable, eco‑friendly power with quick installation and minimal downtime in the field.
Precision-cut specifically for the Megger MFT1710 High-strength adhesive backing for long-lasting durability Manufactured from tough, wear-resistant materials Clear, high-contrast printing for easy reading of all functions and settings Maintains the clean, professional appearance of your tester Simple, tool-free installation – just peel and apply
![Megger MFT-X1 8x AA Replacement Empty Battery Module for Alkaline Cells [1013-452]](https://testermans.co.uk/wp-content/uploads/2024/05/MEGGER-MFT-X1-8X-AA-REPLACEMENT-EMPTY-BATTERY-MODULE-FOR-ALKALINE-CELLS-1013-452-4.png.webp)
![Megger MFT-X1 8x AA Replacement Empty Battery Module for Alkaline Cells [1013-452]](https://testermans.co.uk/wp-content/uploads/2024/05/MEGGER-MFT-X1-8X-AA-REPLACEMENT-EMPTY-BATTERY-MODULE-FOR-ALKALINE-CELLS-1013-452-1.png.webp)
