The easy-to-use data management solution

New Model, New Features

As the upgraded version of Fluke’s older multifunction electrical installations testers, the Fluke 1662 MFT includes a selection of brand new features which weren’t found on the older models.

It’ll also still do a wide variety of the standard measurements you would expect from a multifunction tester (see below for further information).

The new features of the Fluke 1662 multifunction tester are:

• RCD tripping current level ramp tests
• RCD auto tests and ramp tests
• Pulsating DC sensitive RCD tests (G and S type)
• Remote probe for easier test activation
• On/off switchable auto start for RCD and loop testing
• A heavy duty, single input line cord

Measurements Made Easy

The Fluke 1662 multifunction tester is designed from the ground-up to give electrical installers quick, easy access to all the testing procedures you’ll need for basic electrical installation testing in a wide variety of environments.

A simple rotary dial on the right side of the unit allows you to quickly change between different testing procedures, with all results shown on the large-size LCD screen built into the centre of the multifunction tester.

For ease of use, Fluke MFTs can be used in a wide variety of positions. Whether it’s balanced on the floor next to you, on a ladder rung or hung around your neck on the included strap, you’ll have easy access to your tester whenever and wherever you need it.

This multifunction tester includes all of the following testing procedures:

• True RMS AC and DC Voltage Measurements – perform voltage measurements accurately up to 500V. True RMS ensures that all AC measurements are as accurate as possible, even when testing unusual electrical loads
• Continuity and Resistance Measurements – with automatic polarity swap and integrated continuity beeper
• Wiring Polarity Checker – easily check if wiring polarity is as it should be and make adjustments as needed
• Insulation Resistance Testing – range of up to 1000MΩ with selectable test voltages of 100, 250, 500 and 1000V
• Loop and Line Resistance Measurements – with no trip and high current trip modes included
• Prospective Current Measurements – includes prospective earth fault current (PEFC/IK) and prospective short circuit current (PSC/IK) modes
• RCD Testing – includes multiple modes: RCD tripping time, tripping level (ramp test), automatic RCD sequence and RCD variable current
• Phase Sequence Indicator – detects and displays the direction of phase on the built-in display

Activate Your Tests Remotely with the Included Remote Probe

Fluke understands that accessing your MFT sometimes just isn’t possible when you’re working on a tricky electrical installation.

With the included TP165X Remote Control Probe, you can configure your testing procedure before you get into a difficult position and then activate the test when you’re ready by pressing the button on the probe.

A simple, quick and convenient method designed to speed up your testing and help you to work smarter.

Fluke 1662 Multifunction Tester Key Features:

• The new and improved version of Fluke’s 1651 and 1652 multifunction testers
• Suitable for use with domestic, commercial and industrial electrical installations
• NEW – RCD tripping current level ramp tests, RCD auto tests and pulsating DC-sensitive RCD tests (G/S type)
• AC/DC voltage measurements (true RMS for AC)
• Frequency measurements
• Wiring polarity checker (detects broken PE and N wires)
• Insulation resistance measurements
• Continuity/resistance measurements
• Loop/line resistance measurements
• Prospective earth fault current (PEFC/IK)
• Prospective short-circuit current (PSC/IK)
• Phase sequence test
• RCD variable test current
• On/off switchable autostart for RCD and loop tests
• Integrated self-test to ensure ongoing accuracy
• Backlit illuminated display for easier use in different lighting conditions
• Download saved results to a PC via the IR-USB port and using Fluke’s DMS or INST (version 1.6 or higher) Software

Upgrade to the Fluke 1663 or the Fluke 1664FC Multifunction Tester

Want even more from your new multifunction tester? Consider upgrading to Fluke’s 1663 and 1664FC, upgraded version of the 1662 which include even more features than you’ll find on this entry-level unit.

• Fluke 1663 – includes several new features such as earth resistance, ability to test DC-sensitive RCDs, Z max memory and the ability to store results in internal memory
• Fluke 1664FC – the most powerful model in the series. Includes the ability to wirelessly interface with your smartphone or tablet plus intuitive new measurement modes such as automatic insulation testing and insulation safety pre-tests

Fluke TruTest Data Management and Reporting Software Package

Fluke TruTest Software is designed to eliminate the hassle associated with traditional electrical system data management and reporting. Whether you are testing fixed wire installations, or appliances in an office, verifying repairs in a workshop, or performing annual inspections proper data management is critical for producing easy-to-understand reports for clients. Compatible with a growing list of Fluke and Beha-Amprobe test and measurement devices TruTest Software allows you to quickly and easily import measurement results directly from your test instruments, manage files transferred from instruments, or manually enter data as needed.

With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports complete with your company logo and electronic signature.

• Streamlined data management
• Manage test results, client and site data with ease, and create reports quickly using the intuitive user interface and custom-report builder.
• Create custom auto-tests
• Choose from pre-defined automatic test codes, or create your own to ensure technicians gather the right data at the right site.
• Dashboard interface
• Live on-screen intuitive dashboard interface allows the user to see the status of all their clients instantly and navigate to further levels of detail if desired.

Compatibility

• TruTest™ is compatible with a growing list of Fluke and Beha-Amprobe test instruments including the following:
• Portable Appliance Testers
• Fluke 6500
• Fluke 6500-2
• Multifunction Installation Testers
• Fluke 1653
• Fluke 1653B
• Fluke 1654B
• Fluke 1662
• Fluke 1663
• Fluke 1664 FC
• Databases from the Fluke DMS Software or Beha-Amprobe ES Control software can also be converted and transferred to the TruTest Software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion.
• Quickly produce easy-to-understand test certificates and reports
• Comprehensive reporting
• Fluke TruTest Software simplifies the reporting process so you can produce easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, and NEN3140. All of these reports are available at the touch of a button, and a pre-configured international template ensures that no matter your location TruTest Software has you covered.
• 
• Tree topology
• Hierarchical tree topology is used to represent clients, sites, locations and appliances, making it ideal for use in larger networks while allowing you to maintain testing and reporting flexibility. Each element is presented as a single tree node and the properties of each node are presented after selection. Tree topology can be maintained by adding nodes, deleting nodes, duplicating nodes, duplicating subtrees and node editing.

What’s In the Kit?