⚡ IP54 rated for protection against dust and water ⚡ Supports both 2 pole and 3 pole testing ⚡ Attached Rod Technique (ART) available with optional Megger ICLAMP ⚡ Can reject noise up to 40V peak to peak for accurate results in noisy environments ⚡ Comes with a calibration certificate for assured accuracy
⚡ Clear easy to read digital display ⚡ 2 and 3 wire earth testing ⚡ Selectable 25 V or 50 V output ⚡ Complete with lead and stake kit ⚡ Simple one button operation
⚡ Two-, three-, and four-pole testing for a wide range of ground-testing applications ⚡ Selectable voltage outputs of 25V and 50V with multiple frequency options (94Hz, 105Hz, 111Hz, 128Hz) ⚡ Adjustable current outputs of 4.5mA, 0.45mA, and 0.045mA for flexible testing ⚡ Resistance measurement range from 0.01Ω to 200kΩ and ground noise voltage from 1V to 100V ⚡ Cat IV…
⚡ Includes the Megger DET4TC2 Digital Earth Tester for accurate and reliable ground testing ⚡ ICLAMP enables Attached Rod Technique (ART) testing without disconnection ⚡ VCLAMP allows stake-less testing, ideal for environments where driving stakes is impractical ⚡ Supports two-, three-, and four-pole testing with a resistance range of 0.01Ω to 200kΩ ⚡ Advanced noise cancellation eliminates interference up to…
⚡ Extended measurement range from 0.01Ω to 200kΩ for versatile ground testing ⚡ Includes ICLAMP for ART testing and VCLAMP for stake-less testing in challenging conditions ⚡ User-selectable test frequencies to minimize interference in noisy environments ⚡ Rechargeable batteries with an AC/DC adaptor for efficient and sustainable power usage ⚡ IP54 rated, ensuring reliable performance in outdoor environments with weather…
⚡ IP54 rated for dust and water resistance, suitable for both indoor and outdoor use ⚡ Supports 2, 3, and 4 point testing with selectable 25V or 50V output ⚡ Simple one-button operation for easy switching between modes ⚡ Automatically evaluates and displays the condition of P and C spikes ⚡ Measures resistance from 0.01Ω to 20kΩ and earth voltage…
⚡ Two-pole, three-pole, or four-pole earth testing for versatile measurements ⚡ Selectable 25V or 50V voltage output for flexible testing conditions ⚡ Large, clear LCD screen and simple dial interface for easy operation ⚡ Integrated voltage tester and ability to negate interference up to 40V peak to peak ⚡ Rechargeable AA batteries with charger included for cost-effective power usage
£3,316.00–£3,441.00Price range: £3,316.00 through £3,441.00
Durable ohmmeter capable of measuring low-resistance in variety of products and environments Interchangeable test lead terminations Five test modes, including Auto Start on Connection; Normal; Automatic Unidirectional; Continuous; Inductive All modes selectable via rotary switch which is easy to use in all weather conditions and when wearing gloves Tests last for up to 60 seconds
Select options
This product has multiple variants. The options may be chosen on the product page
£4,286.00–£4,622.00Price range: £4,286.00 through £4,622.00
⚡ Powerful instrument ideal for any low resistance measurement application with range from 0.1μΩ to 2000Ω (7 ranges) ⚡ Manual and automatic modes - automatically choose a test current of up to 10A DC or you can manually set the test current yourself ⚡ Variety of different measurement modes: ⚡ Normal Mode - initiates a test by pressing the Test button on the instrument…
Select options
This product has multiple variants. The options may be chosen on the product page
UKAS calibrated for full traceability and compliance 1000 V / 1000 A AC/DC measurement capability Power, harmonics & energy analysis in one instrument Bluetooth connectivity to Megger Link app CAT IV 600 V safety rated for supply‑side work Non‑contact voltage detection + built‑in LED torch Large backlit display with auto‑ranging
TPT420 LCD/LED Two Pole Voltage & Continuity Tester VF5 AC Voltage Detector (Audible) MSA1363 UK Mains Test Socket Adaptor MST220 UK Mains Socket Tester (Audible) LA-KIT Set of five Lamp/Luminaire Light Fitting Test Adaptors MSL10 Wall Stud Locator
For use with all single and 3-phase electric vehicle charging points Performs PE Pre-Test, CP Error/PE Error simulations and more Includes Type 2 & Type 1 Charging plugs, carry case and connection cables Supplied with Type 2 Plug and Type 1 to type 2 Plug Adaptor ⚡ Lightweight & compact design
⚡ Checks mode 2 and single-phase mode 3 (level 1 and two phase level 2) chargers ⚡ Checks chargers with SAE J1772 Type 1 and Type 2 connectors ⚡ Performs four EV charger safety checks ⚡ Performs four EV charger operation checks ⚡ Checks to see if nuisance tripping or RCD/GFCI is likely to occur ⚡ Reads control pilot state…
⚡ Seamless Integration: Fully automated EV charger testing when paired with the Megger MFT-X1. ⚡ Enhanced Efficiency: Eliminates the need for manual adaptors or control boxes, speeding up testing. ⚡ Comprehensive Testing: Supports single and three-phase chargers with full CP and PP state control. ⚡ Robust and Reliable: IP54-rated for outdoor use, with lithium-ion battery and USB-C charging. ⚡ Advanced…
Approximately 30cm x 27cm x 9cm Internal slot for test leads, crocodile clips, and test probes Ergonomic handle for easy transport Stable base allows the case to stand upright Secure clips prevent accidental openings
This Megger hard carry case is suitable for all MFT 1700 Series multifunction testers. This carry case doesn't just store and protect your tester There is also enough space for the accessories such as leads. Approx Measurements: 37 x 34 x 11cm
⚡ The user can test with more than 13 testing features, all included in this versatile and well-protected multi tester ⚡ The IMT100 is able to store up to 256 test results, which can then be uploaded to a USB an exported externally ⚡ Users can run a 4 wire low resistance bonding test or a 2 wire continuity and…
⚡ 4 mm safety socket - compatible with any test equipment that has 4 mm safety connectors ⚡ Voltage range - 0 V to 253 V AC ⚡ Frequency range - 50/60 Hz ⚡ Maximum current - 2 A ⚡ IEC 61010 compliant - meets the safety standards for electrical test equipment
🔌 Compatible with Megger MFT-X1 Li-ion battery pack 🔌 Includes UK, EU, USA, and AU plug adapters 🔌 Fast and safe charging with built-in protection The MBC2100 charger is designed specifically for the Megger MFT-X1’s lithium-ion battery pack.
⚡ Replacement Battery or Secondary Battery For Megger MFT-X1 ⚡ Clips In And Out Easily ⚡ 4.4Ah capacity, providing extended power to your Megger MFT-X1 ⚡ Durability and resilience ⚡ Long-lasting and consistent power supply
⚡ Trace cables and conductors in walls Effortlessly locate wires within walls for seamless troubleshooting and maintenance. ⚡ Works on both live and dead cables or conductors Adaptable for various situations, ensuring reliable operation regardless of the cable's state. ⚡ Locate conductor breaks and short circuits Quickly identify faults to save time and minimize disruption during repairs. ⚡ Identify fuses…
