Socket and See RCD PRO Professional RCD Tester will test Types AC ACS A RCD’s with Protective Case
⚡ Tests most commonly found RCD types (AC, A, ACS)
⚡ Simple autotest for 30mA RCDs
⚡ Ramp test for convenience
⚡ Magnetic hanging Strap
⚡ Protective Case
⚡ Calibration Certificate
£234.00 inc VATexc VAT /
The RCD PRO is a digital RCD tester that will test the most commonly encountered RCD’s to current standards. This includes standard (AC) type, selective (ACS) type and A type RCD’s.
- Tests most commonly found RCD types (AC, A, ACS)
- Simple autotest for 30mA RCDs
- Ramp test for convenience
- x½, x1 test on all RCD types
- x5 test on 30mA RCD’s
- Auto 0º – 180º toggle
- AC Voltage VLN
- Distribution network operator polarity test pad
- Result Recall
- Hands-free function
- Polarity, voltage present LED
Auto switch-off function for battery preservation. The Socket & see RCD PRO shares many features of advanced, more expensive multifunction testers, including ramp and auto testing. Advanced features such as hands-free and built-in polarity test pad offer extra user convenience and safety. Encased in a tough rubber boot with a large backlit screen, the RCD PRO is a ‘go anywhere’ tool that is designed to survive frequent use. The smooth rotary dial and large buttons both make for ease of use, even when wearing gloves. The RCD PRO is also easy to maintain with a clean damp cloth and mild detergent. Socket & See RCD PRO test sequences…30mA Auto Test
The 30mA autotest is available for A and AC-type RCD. The tester will monitor the mains for correct polarity and voltage. If parameters are correct the Volts Present LED will illuminate green and a test can the carried out. On pressing the test button. The autotest will begin. X½, x1, and x5 tests will automatically be carried out at 0º and 180º. The results can be seen by using the recall button to toggle through results.RCD Manual Testing
Select the required RCD type on the rotary dial. Then use the multiplier button to select the required test current. If the polarity and voltage of the main are correct the green volts present LED will illuminate and a test can be carried out by pushing the test button. The first test will always be done at 0º the tester will then automatically cycle to 180° ready for the next test. Ramp test
Rather than applying a set test current this gradually increases the level of additional leakage to identify at what current the RCD trips.
Select the required RCD type on the rotary dial. Then use the multiplier button to select the ramp feature. If the polarity and voltage of the main is correct the green volts present LED will illuminate and a test can be carried out by pushing the test button. The tester will display the leakage current at which the RCD tripped along with a pass or fail indication.
The Hands-Free function can be used with any RCD test. Select the required RCD type on the rotary dial. Press the Hands-Free button HANDSFREE will be displayed on the screen. Once the tester is connected, correct voltage and polarity is confirmed an RCD test will be conducted without TEST being pressed.
Polarity Test Pad
It is a little-known fact that a system can be reverse wired with Live (Phase) to earth/neutral and earth/neutral to Live (Phase) The sockets will all work and conventional testers will show and test that everything is correct despite this very dangerous wiring condition.
The Socket & See RCD PRO is fully BS EN 61010 and BS EN 61557 certified.
EMC compliance – BS EN 61326
To see the DATA SHEET for this product please click here: socket_see_rcd_pro_datasheet
- Socket & See RCD PRO
- Socket & See RCD PRO manual
- Mains lead with 3 x 4mm connectors
- Magnetic hanging strap
- 4 x AA alkaline batteries
You may also like…
Socket and See IRCPRO Insulation and Continuity Tester Hands-Free Function£245.00 exc VAT / £294.00 inc VAT Add to basket
Kewtech Digital Insulation/Continuity, Loop Impedance, RCD Tester – KT300 KT400 KT500 Three Testers in One Complete 18th Edition Test Kit! KT345Kit£945.61 inc VAT exc VAT / Select Options
Socket & See SOK36 Professional Socket Tester£39.95 exc VAT / £47.94 inc VAT Select Options